STANDING RIGGING
• Stainless steel chain plates,
• Four (4) each port & stbd shrouds,
• Single Furlex head stay
• Single back stay with wheel adjuster/tensioner.
• One (1) inner forestay.
• Bronze chrome turn buckles.
RUNNING RIGGING
• Dacron braid sheets,
• Dacron braid halyards, internal & external, outhaul & topping lift,
• Five (5) purchase main sheet adjuster
• 3:1 cross cockpit traveler and adjuster port and stbd Genoa tracks and blocks.
• One (1) spinnaker pole and running rigging & aft turning blocks port & stbd.
WINCHES
• Two (2) Lewmar No. 43 two speed self tailing primary winches.
• Two (2) Lewmar No. 8 single speed mast mount halyard winches.
• Two (2) Lewmar No. 16 single speed, self tailing sheet, halyard, utility secondary winches.
SAILS
• One (1) full batten main sail
• One (1) Jib top stay sail
• One (1) Genoa approx 130% roller furling system head sail
BILGE PUMPS
• 3 new bilge pumps recently installed (jan 2012)
FRESH WATER PUMPS
• One Flo-Jet fractional HP 12 Volt DC electric water pump demand type with an accumulator tank.
• One Whale foot operated water pump in the galley.
FRESH WATER TANKS
• Reportedly 80 gallon U.S. One (1) independent aluminum tank mounted below the stbd settee
• One (1) polypropyne tank located under port side aft quarter berth
• One (1) polypropylenetank located under port side salon dining settee.
HOT WATER HEATER
• One Sea Ward 115 Volt AC approx 6 gallon U.S. capacity with engine heat exchanger system.
BATTERIES
Two Group No. 31 Ever Start lead acid 12 Volt DC batteries boxed & secured.
FUEL TANKS
• 36 gallon U.S. one (1) welded aluminum fuel oil tank, located stbd side aft lazarette.
• One 500 FG Racor fuel filter services main engine.
• Brass valves, plastic lines, rubber hoses & lines, stainless clamps, bronze & plastic fittings. |