Metal Endeavour Emblems
Date: January 13, 2002
From: Phil Cousinenau pcousine@tampabay.rr.com
I am 80% through a 2 year refit of a 1984 E35, I am trying to find a replacement Crest/plate. This is the Endeavour metal crest which on our boat is located on the Starboard side of the companionway, just aft of the last port.
It's obvious I can't get a new one, but does anyone have one to sell or know where to get a new one, or how to clean it up?????
Date: January 13, 2002
From: Nathaniel W. Pierce npierce@bluecrab.org
I have a 1984 Endeavor 35. Not sure I have ever seen the crest plate. What does it look like? Given your description of the location, it is right above the icebox/refrigerator.
Date: January 13, 2002
From: Sandy & Ken Green GREENLEG2@aol.com
We have tried to clean our two crests and have not been totally successful. We would also like to know how to do this.
Date: January 14, 2002
From: Howard Gilbert howiegilbert@yahoo.com
I have made a mold of one the I cleaned up and have successfully cast a few in resin that I have painted but I am now looking for the right color of bronze pounder to mix with the resin so the color will be in the resin and they will not have to be painted. I will keep you posted.
Date: January 15, 2002
From: Lee and Carol Elwell LEEELWELL@aol.com
We are in New Hampshire skiing at the moment. When we get home early February I will check to see if I still have any around. Great job on your news features to all owners. Hope the venture is going well.
Date: April 5, 2002
From: Paul Uhl endvr32@endeavourowners.com
The "medallion" we're discussing here seems to only appear on later model boats (ie: E35, 38). It is a metal (brass or bronze) emblem in the shape of a cut away section of a boat hull. It appears on both the port and starboard side of the coach roof, centered between the two aft ports and 2.25" below the eyebrow.
Date: May 2, 2002
From: Bud Berry islandtm@aol.com
Endeavour Owners
I have 1 only new gold plated medallion (picture attached) that was originally placed on the 42' and other size endeavours. i am interested in finding a source for molding replacement medallions of plastic. Anybody have any ideas and might be interested in getting these made please contact me.
Date: May 13, 2002
From: Paul Uhl endvr32@endeavourowners.com
Bud,
What about getting some silcone molding compound and making a copy of it the way one would copy nonskid. Then pour some resin mixed with filler into the mold and let dry.
